Page 7
For technical questions, please call 1-888-866-5797.
Item 66771
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Assembly Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this Trailer.
Note:
For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 18.
Note:
It is recommended that only a qualified technician perform the electrical service that may be needed
to enable your particular make/model vehicle to power the Trailer’s 12 volt DC lighting system.
1. Place the Trailer Body (1) upside
down, as shown in
Figure A
.
Body (1)
Figure A
2. Use the Bolts (25) and Lock Nuts (33) to fasten the
Leaf Springs (2) onto the sides of the Trailer Body.
WARNING!
Mount the Leaf Springs with
the mounting eye facing towards the
front of the Trailer. See
Figure B
.
Leaf
Springs (2)
Bolt (25)
Front
Figure B
3. Place the Axle (3) on top of the Leaf
Springs. See
Figure c
.
Axle
(3)
Leaf
Spring
(2)
Figure c
4. Fasten the Axle to the Leaf Plates. Do this
by placing the Spring Plates (22) under the
Leaf Springs. Then slide the U-Bolts (36)
over the Axle and through the holes in the
Spring Plates. Lock U-Bolts into place by
using the Lock Nuts (34). See
Figure D
.
Spring
plate (22)
Leaf
Spring (2)
U-Bolt (36)
U-Bolts (36)
Axle (3)
Figure D
5. Place Tires (5) onto the Hubs (4) at the end of the
Axle. Lock Tires into place using the Lug Nuts (38).
