Page 8
For technical questions, please call 1-800-444-3353.
SKU 44649
4- Wheel ATV unloading
WARnIng!
ThIS RAMP IS FOR uSe WITh 2
•
OR 4-WheeLeD ATV’S OnLY. DO
nOT uSe ThIS RAMP TO unLOAD
3-WheeLeD VehICLeS.
DO nOT uSe ThIS RAMP TO
•
unLOAD AnY VehICLe ThAT
WeIghS MORe ThAn 1000 LB.
DO nOT uSe ThIS RAMP TO
•
unLOAD AnY VehICLe ThAT IS
WIDeR ThAn The RAMPS, ADjuST
The RAMPS BY MOVIng The ATV
CLOSe TO The hAuLIng VehICLe
AnD ADjuSTIng The WIDTh
BeFORe PuTTIng AnY WeIghT On
The RAMPS.
DO nOT uSe ThIS RAMP TO
•
unLOAD AnY VehICLe ThAT IS
CARRYIng geAR On ITS RACKS.
DO nOT uSe ThIS RAMP IF The
•
TAILgATe On The VehICLe BeIng
unLOADeD IS hIgheR ThAn hALF
The RAMP’S LengTh.
WARnIng! All persons not involved in
the unloading process must stand
clear of the loading Ramp and
truck.
Keep pets away.
WARnIng! RIDIng An ATV WhILe
unLOADIng IS DAngeROuS AnD
ShOuLD nOT Be ATTeMPTeD.
Have a qualified adult assistant
1.
monitor the Ramp tongue for slippage
on the tailgate.
Setup the ramp on the tailgate as
2.
explained under “Operation”, on page
6. Remove all tie down straps and
securing equipment from the ATV.
WARnIng! ALIgn The RAMPS ARe
WITh The 4-WheeLeD ATV’S
TIReS.
While staying off the ATV, start the
3.
engine, disengage the parking brake,
put the transmission into reverse,
and make sure the wheels are in a
straight line with the ramp. While
holding the brake, position yourself
on the truck bed in front of the ATV.
Release the brake and push on the
4.
ATV to get it started down the ramp.
Allow the ATV to roll down naturally,
do not attempt to steer it or apply the
brakes. If it stops while on the ramp,
gently give it throttle to back it off the
ramp.