manualshive.com logo in svg

HAUL MASTER 44649, Руководство по установке и эксплуатации, Страница: 6 / 12

Поделиться
Скачать
HAUL MASTER 44649 Скачать руководство пользователя страница 6

Page 6

For technical questions, please call 1-800-444-3353.

SKU 44649

OPeRATIOn

  Read the enTIRe IMPORTAnT 

SAFeTY InFORMATIOn 

section at the beginning of this 

manual including all text under 

subheadings therein before set 

up or use of this product.

WARnIng!  The vehicle that is 

1. 

being loaded into must be turned 

off and in gear or park, with the 

emergency brake engaged and the 

wheels blocked.
WARnIng!  each individual Ramp 

2. 

must have a safety chain (not 

included) correctly installed and 

connected (see #6 below).  Make 

sure each Ramp is clean and dry 

before loading.
WARnIng!  Wear a safety helmet, 

3. 

AnSI-approved safety goggles, 

heavy-duty work gloves, and steel-

toed work boots at all times during 

loading and unloading.

The tailgate the ramps will sit on and 

4. 

both of the ramps must be dry and 

clean.  Check for and tighten any 

loose hardware
Sit the tongue (angled lip) of the 

5. 

Ramp on the tailgate.  The Tongue 

Edge must face down (see Assembly) 

fully contacting the tailgate of the 

truck.  Extend the Safety Chain (not 

included) on each Ramp up into the 

inside of the truck bed; attach each 

Safety Chain to a secure attachment 

point on the truck chassis.

WARnIng! COnneCT SAFeTY ChAInS 

TO SeCuRe ATTAChMenT 

POInTS WIThIn The TRuCK 

BeD ABLe TO WIThSTAnD The 

PuLLIng FORCe OF LOADIng.  

TheY MuST ALSO Be TAuT 

enOugh TO PReVenT The RAMP 

FROM COMIng OFF The VehICLe 

BeIng LOADeD.

Pull the loading ramp back until the 

6. 

chains are tight.  The entire tongue 

portion of the ramps must fit onto 

the tailgate; If not, adjust the Safety 

Chains accordingly or shorter chains 

must be used.
Chain Adjustment:  Remove the 

7. 

bolt and washer that hold the safety 

chain to the ramp.  Reinsert the bolt 

through a link that will shorten the 

chain so the loading ramp can not 

be pulled backwards by the ATV’s 

rear tire.  Tighten the bolt properly.  

Make sure the washer prevents the 

bolt from slipping through the chain 

link.  Adjust the other chain to equal 

length.

Содержание 44649













Отзывы:

Нет отзывов