HAUBER-Elektronik GmbH
7
10
Technical data
10.1
General data
Both the measuring range and the frequency range can be adjusted via IO-
Link.
Measurement accuracy:
±10% (as per DIN ISO 2954)
±0,5% at calibration point
Calibration point
1 g (rms) @159.2 Hz
Cross-sensitivity:
< 5%
Frequency range:
Selectable in the
range of 10 Hz… 1000 Hz See also IO-Link
description of functionality, page 12.
Maximum acceleration
±15 g
Service life
?? years
MTTF
??? years
Tab. 1: General data
10.2
Electrical data
Voltage supply:
24 V DC ± 10%*
Current supply (max.):
250 mA
Output 1 (Pin 4)
Output signal:
4
–20 mA (proportional to the measuring range)
Apparent ohmic resistance/load
(max.):
500
Ω
Switching outputs
Output signal:
Digital I/O
Electrical execution
PNP/NPN (configurable)
Output function:
Normally closed / normally open (low-active / high-active)
Switching levels:
0 V: Low
24 V: High
Current draw per output (max.): 100 mA
Short circuit protection:
yes*
Overload protection:
yes*
* Ensure that the supply line is protected by a UL-approved fuse for UL-compliant sensor
operation.
Tab. 2: Electrical data
