1/2
This information may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Technology
AS. The products may not be copied or duplicated in any way.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG fi le.
DATASHEET
Hatteland Technology AS | www.hattelandtechnology.com | Enterprise no: NO974533146
1/6
The remote controller enables the control of Series 1 G2, Series X G1, Series X G2, MVD Series and selected HM CMD / RMD monitors
by providing instant keypad functionality over RS-485/422 bus through the well implemented SCOM Protocol by Hatteland Technology
AS. A single press on the remote controller will trigger the same physical press on all connected/configured units with the
synchronized reaction of corresponding button presses. The remote controller provides several functions through 3 physical buttons
for user interaction. Remote Control is powered and driven by first monitor unit (which has to be connected to external power cable/
source. It is not required to turn the monitor unit on for the Remote Control to control/operate other monitor units that may be in
the same chain).
External Remote Controller for Monitors
Manufacturer:
Hatteland Technology AS
Product:
External Remote Controller for Monitors
Typenumber:
HD REM SX1-A1
Last Revised:
16 Sep 2022
Revision#:
21
Description:
ACCESSORY
• Connector
1 x 6-pin Terminal Block 3.81, non-isolated
• Mounting
Includes mounting bracket with 2 x PanHead M3x6mm.
(Tightening Torque 0.8 Nm) and 2 x Thumb Fastening screws for console
mounting.
• Physical Dimensions
W:125.00 [4.92"] x H:37.50 [1.48"] x D:72.30 [2.83"] mm [inch]
• Weight
123g
• Connectivity
- Shipped with 1 x 6-pin Terminal Block 3.81 loose connector (Art: 1828388)
- Connect Remote Control to first display unit, other units in connection chain
will receive same commands.
- See page 2 for Physical Wire Connections.
• User Manual
- This datasheet. Detailed usage: SCOM Technical Manual can be used with
command-set regarding User Controls:
Series 1 G2 models:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-12.htm
Series X G1 models:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-4.htm
Series X G2 models:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-6.htm
Multi Vision Display MVD models:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-8.htm
•
Test and certificate
Hatteland Technology standard, (tested / type approved by the
following classification societies):
IEC 60945 4th (EN 60945:2002), IACS E10,
EU RO MR
- Mutual Recognition,
ClassNK
- Nippon Kaiji Kyokai
Specifications:
FRONT VIEW
SIDE VIEW
BACK VIEW
TOP VIEW (w/ console panel)
PANEL CUTOUT
1 2 3 4 5 6
