F
IRE
L
OG
P
LACEMENT
CAUTION:
Fragile! Handle log set with care.
Always wear gloves and safety goggles while
handling the log set.
Place only the Fire log set supplied with the Luno in the
firebox. Do not place any other logs, wood logs, or other
materials in the firebox. If the log set is damaged or broken
contact your dealer for replacement. Only replace the logs
with the same approved replacement parts. These
components affect the combustion quality and safety of the
heater. The Fire log set is durable; however, they will break
if subjected to rough or improper handling. Exact
positioning of the log set is required in order to obtain a
pleasing flame pattern and efficient combustion. Incorrect
log placement may cause carbon build-up; excess thermal
stress on the log set and stove parts, reduced efficiency,
and high levels of carbon monoxide. If the log set does not
fit into the firebox exactly as outlined, contact your dealer
for assistance.
I
NSTALLATION OF THE
F
IRE
L
OG
S
ET
Follow the order of the following photos in order to install
the log set:
1. Install the rear left log in the rear left corner.
2. Locate and install the rear right log.
3. Locate and install the ember pile. This will have two
holes underneath that fit over two posts in the center of
the burner top.
4. Install the Center log. The bottom tip rests in the cradle
of the ember pile.
hase
-
Luno
Model
8160
Manual # 6400-40457
Revised: 7/27/2011