T
TO
O IIN
NSST
TA
ALLLL B
BA
AT
TT
TEER
RIIEESS
Using Phillips screwdriver, loosen screws in battery compartment cover (screws
stay attached to cover). Remove cover. Insert 3 "D" alkaline batteries as indi-
cated. Replace cover and tighten screws.
T
TO
O C
CR
REEA
AT
TEE LLIIT
TEE--B
BR
RIIT
TEE PPIIC
CT
TU
UR
REESS
The LITE-BRITE Flat Screen toy comes with over 200 pegs and 10 design pic-
tures to make colorful, light-up creations!
1 Tear the picture sheets along the perforated lines and remove.
2 Place a picture sheet flat and straight on the peg screen. Position the sheet
so that the star on each corner is next to a corner on the peg screen. Push a
peg through the hole in each star to secure the picture to the screen.
3 When creating a picture, follow the printed letters on the sheet to tell which
colored pegs to use (see chart). If you are making a free-form picture,
simply insert the pegs through the holes wherever you want for your own
unique designs.
4 Insert the colored pegs through the paper and into the peg screen as far as
they will go.
5 Press the button to make your creations shine! Each time you press the
button, the light will at first be bright, then fade out within 3 minutes to
conserve battery life.
CAUTION:
TO AVOID BATTERY LEAKAGE
1. Be sure to insert the batteries correctly and always follow the toy and
battery manufacturers' instructions;
2. Do not mix old batteries and new batteries or alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium) batteries;
3. Always remove weak or dead batteries from the product.
LETTER
COLORED PEG
ON PICTURE
TO USE
R
RED
B
BLUE
O
ORANGE
W
WHITE
G
GREEN
Y
YELLOW
P
PINK
V
VIOLET
C
Coolloorr C
Chhaarrtt
Press to light
up design!
Store pegs
here.
Insert peg
