background image

2

AR 250 ARCORAIL

for HOME STYLE BEDS

If you have any questions please contact Customer Care at [email protected] 
For Warranty details please visit www.hartvision.com 

REPLACE THIS WITH NEW WORDING

NOTE: In the new wording replace Roto Pole with ArcoRail

WARNING & CAUTIONS 

• Please read these Instructions carefully before installing and 

using your ArcoRail. Please read the Warning and Caution labels 
attached to the ArcoRail product. Incorrect Installation or incorrect 
use of ArcoRail can result in serious injury or death.

• The ArcoRail is an Bedside Balance Assist and must not be used 

for any other purpose. ArcoRail is to assist people in moving in 
bed, helping with balance when getting into and out of bed and 
to assist with balance when standing beside the bed or during 
transfers near the bed.

• The ArcoRail is not to be used as a restraint, or to prevent people 

from falling out of bed. There are correctly designed Bed Rails for 
these purposes.

• ENTRAPMENT: Entrapment describes a situation where a person’s 

neck, head, chest or torso can get trapped in the space between 
the mattress and horizontal bar or between the vertical bar and 
the side of the mattress. The mattress must be tight against the 
vertical bar and should be checked daily. A safer way to prevent 
gaps between the mattress and the vertical bar is to install 
two ArcoRails, one on either side of the mattress. Extra safety 
measures and precautions should be used with high-risk people.

• The ArcoRail is not intended to support the full weight of the user

 

and is suitable for people weighing up to 300 lbs (135kgs)

• Read the FDA’s “A Guide to Bed Safety” This can be found on

 

Google.

• The contents of the box may not be exactly as shown.
• If you have any questions please contact Customer Care at 

[email protected]

• For Warranty details please visit 

www.hartmobility.com

AR250 ARCORAIL FOR 

HOME STYLE BEDS

Содержание AR250











Отзывы: