PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to
http://spares.hartmanuk.co.uk/purchase
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
Heritage 150x80cm Adjustable Gas Pump Fully Woven Casual Table
( 68027145 / 68028145 / 68027146 / 68028146 / 68202145 / 68203145 / 68202146 / 68203146 )
ATTENTION:
1.
Please read these instructions carefully before assembly
2.
Aluminium is a soft metal and over tightening may strip the thread or break the part
3.
DO NOT
use power tools
4.
Please allow 30 minutes for assembly
5.
Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled
ASSEMBLY STEPS:
1.
Place table top (A) upside down on a clean surface
2.
Loosely attach table base (B) to table top (A) using bolts (E) and washers (G)
DO NOT TIGHTEN THE BOLTS AT THIS STAGE
3.
Loosely attach leg (C) to base using bolts (F), washers (G) and plastic washers (H)
DO NOT TIGHTEN THE BOLTS AT THIS STAGE
4.
Tighten all bolts using the spanner (I)
5.
Turn completed base over, and put on a desired place
6.
Carefully place the glass (D) on top of the table top
7.
See instructions below for changing table height
For more information regarding maintenance of your furniture please visit
Oblique adjustable table adjustment instructions
1.
Place foot onto the metal pedal at the bottom of the table base to adjust the table height.
2.
To adjust table from high position to a low height, step down the pedal and place your hands on both end of the table top, then press
table top down by force to adjust the table gradually to a low height you want then release the foot pedal, the table will stay and fix on the
height you adjusted.
3.
To lift table from low position to a higher height, just put your hands on table top and step down the pedal, the table will lift up
automatically and release the foot pedal while it lifts to your desired height
4.
Make sure the table top is securely and evenly in place before use.
Component’s
Fixings
Parts List
Parts Picture
Description
Q’ty
Part no
Parts list
Parts Picture
Description
Q’ty
Part no.
A
Table top
1
68027145A
68027146A
68202145A
68202146A
E
M6*40 bolts
4
2002179
B
Table base
1
68028145B
68028146B
68203145B
68203146B
F
M6*55 bolts
5
2002166
C
Leg
1
68028145C
68028146C
68203145C
68203146C
G
Big Flat
Washers
9
1061162
D
Glass
1
68027145D
68027146D
68202145D
68202146D
H
Plastic
washer
5
2100044
