Assembly instruction
1. General remarks – Usage and design of the tool
• The HARTING RJ Industrial® Cat. 5 PROFINET Compact assembly tool
is intended to be used for the assembly of HARTING RJ Industrial®
PROFINET Cat. 5 Compact RJ45 plugs. Using this hand-tool for
any other purpose, or for crimping of any other object, can result in
damaging the tool and the objects being crimped and prevention of
its normal further functioning, for what manufacturer cannot be held
responsible.
• The HARTING RJ Industrial® PROFINET Compact assembly tool
09 45 800 0530 is delivered ready to use and no adjustment is needed
for the first use.
• The assembly tool is equipped with full cycle ratchet mechanism
which with optimized leverage system within the tools make working
with these tools easy and simple. In case of improper crimp, ratchet
release mechanism allows you to easily open the hand-tool and remove
obstruction before work is continued. Check unblocking procedure.
• For removal of dust, moisture and other contaminants usage of clean
brush or soft, lint-free cloth is recommended. Do not use aggressive
agents (thinner, alcohol, …) or hard objects that could damage the tool.
• Make sure that, during the work, bearing surfaces, shafts and pivot
points are protected with thin coat of quality machine or motor oil. Do
not oil excessively.
• When the tool is not in use, store it in a closed position – with handles
closed. That will keep other objects from becoming stuck between
crimping dies and damaging them. Keep the tool in a dry and clean
area.
• Tool itself also incorporates possibility of periodical adjustment of the
crimping force and tool recalibration via eccentric axle to maintain
correct crimp performance. Check item recalibration procedure.
2. Terminating procedure
• Wire lead ends organized and trimmed according to plug assembly
instruction for the HARTING RJ Industrial® PROFINET Cat. 5 Compact
plug.
• Insert the plug assembly in the tool part marked with arrows. Plug must
be inserted up to the delimiter.
•
Slowly
close tool handles completely to perform full cycle crimping.
In case the tool becomes block for any reason, please
follow the unblocking procedure.
• After the full crimping cycle is done, open the tool fully in order to
remove crimped plug. The tool is ready for next crimping cycle.
HARTING Electronics GmbH
P.O. Box 14 73 | D-32339 Espelkamp
English
HARTING RJ Industrial® PROFINET Compact
Assembly tool
Part number: 09 45 800 0530
www.HARTING.com