7
Management Software Ha-VIS mCon Series / Edition 2.4
Introduction
1. Introduction
HARTING’s family Ha-VIS mCon of managed Ethernet switches are suitable for creating Ethernet,
Fast Ethernet and Gigabit Ethernet networks (up to 1000 Mbit/s) with distributed star or nodal
points in industrial environments where a high level of operational reliability is required.
Equipped with up to ten ports, the Ethernet switch can be mounted directly in the field for
convenient networking of Ethernet devices. Your HARTING Ha-VIS mCon Ethernet Switch comes
with an embedded web server and a user-friendly web interface that makes switch management
intuitive and efficient. Configuration and maintenance are also possible using SNMP versions 1,
2 and 3 or using the Command Line Interface (CLI) via Telnet or ssh.
This software guide for the Ha-VIS mCon family of switches contains information required to
operate the switch management software. This information is applicable for all switches in the
Ha-VIS mCon 3000 NG series. The examples and screenshots in this manual are taken from the
Ha-VIS mCon 3102-AASFP; the number of ports and the information shown in your software may
vary depending on the model of switch you use.
This software guide has the following structure:
Chapters 1 to 3
Notes on safety and general information about this manual
Chapters 4 and 5
Basic information about the software, user rights, installation and
logging in
Chapters 6 to 18
Details about the software’s areas and windows and the settings that
can be made
Chapters 19 to 20
Information about SD Memory Card and other service
Appendix
Glossary of terms and abbreviations, index