HARTCOM-W2 User Manual
4/2/2018
Designed and Produced under
Page 22 of 71
ISO 9001:2008 Certification
Step
Action
1
Ensure that the application is running and communications have been established:
The left pane of the window shows the menu structure and the right pane of the window displays
corresponding parameters of the menu selected.
The menus that are displayed are defined in the DD file of the particular device.
If no DD is available for the device DevCom2000 will select the standard DD. This should provide
limited functionality for the device. NOTE: If a parameter is updated that is not supported by the
device you will receive an error.
2
Expand the menu
by clicking the “+” sign and double
-click to view the device parameters. Below is
an example of an expanded menu:
3
Repeat Step 2 to expand sub-menus if required and then select the desired menu / sub-menu to
view the associated parameters / device information.
4.3 Configuring Device Information
4.3.1 Overview
DevCom2000 allows you to view and configure the field device parameters based on the Device Description (DD) file.
However, the device vendor defines most of the parameters at the factory. These parameters become read only for
the users and the user cannot modify the values. The related variables are grouped under various menus of different
levels as defined by the device vendor in the DD file. Expand or col
lapse the tree view using the “+” or “
-
“sign to
access the device configuration parameters.
