HARTCOM-W2 User Manual
4/2/2018
Designed and Produced under
Page 16 of 71
ISO 9001:2008 Certification
3.5: Discovering connected HART Device(s)
a) For wired (4-20mA) HART devices connected via the Bluetooth HART Modem
When the HART Communicator software (DevCom2000) is opened, by default, it will automatically check for HART
devices of address 0 connected to the Bluetooth HART Modem, if found it will display the “Explorer” window (go
to
Step5). If you have previously told it to connect to HART-IP /
Wireless
HART devices, or if you want to check for
devices other than address 0, you will need to change the option within the HART Communicator software
(DevCom2000). Go to “
Options
→
Basic
”
and make sure “Use TCP/IP…” checkbox isn’t selected, see screenshot
below.
Then click on the “Search By” Tab and
select the desired option (see screenshot below) and then press OK.
