Code:
Product:
INS691
Revision 9
24/10/17
Harrod UK Limited
©
View of Product
MATCHPLAY VOLLEYBALL
VOL-050
Pack Contents:
1. 1 x Matchplay VBL Winder Post
(FEQ971)
2. 1 x Matchplay VBL Base including fittings
(FEQ976)
3. 1 x Matchplay VBL Dummy Post
(FEQ970)
4a. 2 x Brace
(PEQ973)
4b. 1x Straps
(pair)
(packed with FEQ970/971)
(packed with FEQ971)
(FPK971)
Fittings Pack (packed within base)
5. 2 x M10 Nylock Nut
(BOL202)
6. 6 x M10 Unistrut Nut
(BOL204)
7. 8 x M10x20 Set Screw
(BOL342)
8. 2 x M10x40 Hex Bolt
(BOL322)
9. 2 x Base Back Plate
(PEQ976)
10. 4 x ‘T’- Bolt
(PEQ977)
1
4a
3
2
MAKE SURE YOU READ THESE
INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING YOUR POSTS
Floor Socket Installation:
All sockets should be installed by a specialist, using the
following guidelines. Please contact your distributor for
recommended specialist fitting engineers.
Mark at location shown in FIG.1. Drill Ø20 holes to the
depth to suit purchased sockets. Socket centres are 11m
x 0.4m (NOTE: 11m is the Harrod suggested centres, this
can range between 10.98m and 11.98m to meet ther
regulation distance between upright and sideline).
Note: Longer sockets are required for sprung floors
(contact your distributor for guidance).
0.5 to 1m
9m OUTER SIDELINES OF COURT
11m SOCKET CENTRES (see note above)
FIG.1
FPK970
Floor sockets are not included and should be ordered
separately.
Solid Floors require 4 off SHP-001
Suspended Floors require 4 off SHP-100
Net Not Included
0.5 to 1m
0.4m
Socket Installation Dimensions - Plan View
490mm
11m CENTRES (this will position the front of the upright 510mm to the sideline)
(This dimension is suggested for guidance, see note above)
