4
1450mm CRS for FBL-154 3 Seat Shelter
2400mm CRS for FBL-155 5 Seat Shelter
3825mm CRS for FBL-156 8 Seat Shelter
4775mm CRS for FBL-157 10 Seat Shelter
PLAN VIEW
SIDE VIEW
Fence Line
600
600
600
360
Socket
centre
to
front
of
fence/
kick
board
40
Play Area
ANC-019
Fibre Tech Pro Team Shelter Anchor
INS043
Revision 2
11/01/2016
Harrod UK Limited
©
Code:
Product:
View of Shelter with Anchors
Pack Contents
Socket Installation
Dig holes 600x600 square x
m
deep at centres shown in
Fig 1. Position the sockets 360mm centrally back from the
front (court side) of the fence/kick board. Concrete the sockets
in leaving approx 40mm from top of concrete to ground level
(for turf). Use a spirit level to make sure that the sockets are
truly vertical and support until set. Replace the turf extracted
when the concrete has cured (allow the concrete to set before
rest of the product).
600 m
assembling the
IMPORTANT
Please read through the instructions
before assembling your shelter. Wear safety glasses
when drilling shelter or cutting fence.
TOOLS REQUIRED
1 x 17mm Spanner
1 x 19mm Spanner
1 x Spirit Level
1 x Marker Pen
1 x Hand Drill
1 x 4mm drill (pilot)
1 x 13mm drill
1 x Cutting Equipment
1.
1 x L/H Anchor Arm
(FEP472)
2.
1 x R
(FEP473)
3.
2 x
4.
1 x Support Post (pair)
(FEQ331)
5.
2 x Socket
(FBL-291)
2 x Anchor Fittings Pack
(FPK087)
Each Containing:
7.
4 x M10 S/S Washer
(BOL709)
8.
2 x M10 ‘U’ Bolt
(SEP497)
9.
3 x M12 x 40mm Cup Square Bolt
(BOL140)
10. 3 x M12 Nylock Nut
(BOL102)
11. 3 x M12 Washer
(BOL703)
12. 3 x M12 Nut Cap
(CAP949)
(including Fittings)
(packed with Anchor Arms)
/H Anchor Arm
Anchor Top Plate
(PEP474)
6.
4 x M10 Nylock Nut
(BOL202)
(including Fittings)
(packed with Anchor Arms)
Page 1
5
4
1
Fence Line
2
8 Seat FibreTech Pro
Shelter shown for
reference only
100
360
Fig.1
3
