HARRISTON INDUSTRIES 93066, Руководство оператора

Страница: 9 / 92

4
2.1 OPERATING SAFETY
1. Read and understand the Operator's Manual
and all safety signs before operating,
servicing, adjusting, repairing, unplugging,
or filling.
2. Do not allow riders.
3. Install and secure all guards and shields
before starting or operating.
4. Keep hands, feet, hair, and clothing away
from moving parts.
5. Stop tractor engine, lower machine to the
ground, place all controls in neutral, set
park brake, remove ignition key, and wait
for all moving parts to stop before
servicing, adjusting, repairing, unplugging,
or filling.
6. Place all tractor controls in neutral before
starting.
7. Operate machine only while seated on the
tractor seat.
8. Clear the area of bystanders, especially
small children, before starting.
9. Keep all hydraulic lines, fittings, and
couplers tight and free of leaks before
using.
10. Clean reflectors, slow moving vehicle sign,
and lights before transporting.
11. Add extra lights and use pilot vehicle when
transporting during times of limited
visibility.
12. Use hazard flashers on tractor when
transporting.
13. Install safety chain when attaching to
tractor.
14. Follow chemical manufacturers' handling
and safety instructions exactly when using
chemicals with machine.
15. Review safety instructions with all
operators annually.
2.2 MAINTENANCE SAFETY
Follow all the operating, maintenance, and
safety information in the manual.
Support the machine with blocks or safety
stands when changing tires or working beneath
it.
Stop tractor engine, lower machine to the
ground, place all controls in neutral, set park
brake, remove ignition key, and wait for all
moving parts to stop before servicing, adjusting,
repairing, unplugging, or filling.
Make sure all guards are in place and properly
secured when maintenance work is completed.
Never wear ill-fitting, baggy, or frayed clothing
when working around or on any of the drive
system components.
Before applying pressure to a hydraulic system,
make sure all lines, fittings, and couplers are
tight and in good condition.
Install safety rod and pin securely in position on
hitch cylinder frame before working under
frame.
Relieve pressure from hydraulic circuit before
servicing or disconnecting from tractor.
Keep hands, feet, hair, and clothing away from
moving or rotating parts.
Clear the area of bystanders, especially small
children, when carrying out any maintenance
and repairs or making adjustments.
Wear appropriate protective gear when
contacting chemical handling components on
machine.