i-vent
VEC8675WP10_NZ
Controller
1
i-vent
3
i-vent
5
i-vent
7
i-vent
2
i-vent
4
i-vent
6
i-vent
8
Operating
Instructions
Contents
I. Features
II. Get To Know Your Controller
1. Appearance
2. Display Information
3. i-vent System Applications
III Operating Instructions
1. Power On/Off
2. Auto Setting
3. Manual Fan Speed Setting
4. View Room Temperature
5. Adjustment
6. Outside Air Setting
7. Filter
8. Others
IV. Tips
3. i-vent System Applications
Standard
The standard i-vent system circulates dry
filtered air from the roof space into the
home. In automatic mode the i-vent
controller adjusts the fan speed based on
the roof space temperature, switching it
off if it gets too hot. Manual fan speed
control can be selected if required.
Outside Air Option
If the i-vent system has the Outside Air
option you may choose to draw in outside
air automatically when the roof space air
is too hot. This is ideal for summer. You
may also choose to operate the i-vent
controller in manual fan speed mode with
the outside air flowing continuously.
III. Operating Instructions
1. Power On/Off
Tap on the touch buttons to power
On/Off the i-vent controller.
2. Auto Setting
Keep tapping
or
until
Auto
is
displayed.
Auto is the best choice for optimum
ventilation and comfort.
When is displayed the Outside Air mode
is on.
When
is displayed, air is flowing from
the outside. In Auto mode, air will only flow
from the outside when the roof space air is
too hot.
The display example below shows Outside
Air mode is on and air is flowing.
To disable Outside Air mode tap
.
8. Others
One or more of the touch buttons are
locked.
Installer Setup Mode
Installer Test Mode
See the Installation Guide for more details.
I. Features
•Large LCD display with white
backlight
•Capacitive Touch Buttons
•Supports standard and outside air
ventilation systems
•Auto or manual fan speed cont
rol
•Optional keypad lock
•Adjustable fan speed temperature set
points
II. Get to Know Your Controller
1. Appearance
2. Display Information
1. Roof Space Temperature
2. Outside Air Mode On (optional)
3. Touch Button Lock (optional)
4. Outside Air Flowing
5. Fan On
6. Manual Fan Speed Bar Graph
7. Auto Fan Speed
8. System Off Indicator
9. Installer Test
10. Installer Setup
3. Manual Fan Speed Setting
Manual fan speeds can be selected, Low,
Medium or High. Manual speeds are
represented by 3 bars.
Keep tapping
or
until the desired
speed is
displayed.
High speed
Medium speed
Low speed
Auto speed, no bars
6. Outside Air Setting (Option)
This section applies if the Outside Air
option has been installed.
In Auto mode when the roof space air is
too hot air will be drawn from the outside.
Once the roof space air cools air will be
drawn from the roof space.
In Manual Fan Speed mode air will be
drawn from the outside continuously.
To enable Outside Air mode tap
.
IV Tips
This symbol is displayed
while the fan is running. If
it is not displayed the fan
is off. The roof space air is
either too hot or too cold.
Seasonal
Adjustment
Seasonal adjustment is
not required. If you do
make an adjustment
(Section III 5.), return
Index 2 setting to 0.0
when conditions change.
Outside Air
If you want to check if you
have this feature, look for
in the display top right
corner. If it is not there tap
. If does not appear
you do not have Outside
Air mode.
Temp. Set
Point
The i-vent system
provides maximum
ventilation based on the
roof space air temp. User
operation is simplified by
not incorporating a
thermostat type set point.
Maximum
Ventilation
If you need maximum
ventilation for any reason, set
the i-vent controller to
manual. Keep tapping
or
until three black bars are
displayed.
Filter
Change
To maintain the warranty the
filter must be changed every
12 months. Failure to change
the filter will lead to
decreased performance.
Buttons
Do Not
Work
Check if the touch button lock
symbol is displayed. See
the Installation Guide.
Two bars instead of a
temperature reading mean
the sensor has failed. Contact
Harrisons. The fan will still
run in manual mode.
Additional
Support
www.harrisonsenergy.co.nz
4. View Room Temperature
Normally the roof space temperature is
displayed. Room temperature can be
viewed if required.
Tap once to view the room temperature.
Tap twice to return to the home screen.
5. Adjustment
The i-vent controller is factory set for
optimum ventilation and comfort control.
There is an adjustment if required. The
adjustment changes the fan speed
temperature set points by up to + or
–
5°C.
For example, if you are finding the
ventilation too cold then you can adjust
the setting from 0 to 5. Doing this will
reduce the fan speed at lower
temperatures and keep the fan running
faster at higher temperatures.
You can also make the home cooler by
adjusting the setting between -5 to 0.
0 is the default setting. -5 is the coolest
setting and 5 is the warmest setting.
Tap
twice
to access the adjustment.
Look for 2 in the top right corner of the
display.
Tap
or
to adjust the setting
between -5.0 and 5.0.
This adjustment alters the fan speed at
temperature extremes. The i-vent system
cannot heat or cool the air drawn in from
the roof space or outdoors. Use the home
heating or air conditioning system to
control the temperature in the home.
7. Filter
The i-vent system filters the air before it
enters the home. You will receive a
reminder to change your filter every 12
months from Harrisons.
To maintain the i-vent system 10 year
warranty the filter must be replaced every
12 months.
