SEL-MDX1
Installation and Operation Manual
8
Copyright © 2011, Harris Corporation
Removing Selenio Modules
Front Module
To remove a front module from a Selenio frame, follow this procedure:
1
Open the front panel.
2
Grasp the extractor handle on the module, pulling down slightly.
3
Using the handle, slide the module out of its slot.
Figure 1-6
Removing a Front Module
4
Close the front panel to ensure proper frame ventilation.
Back Module
To remove a back module from a Selenio frame, you must first remove the front module.
Then unscrew the back module, and pull it straight out. Cover the opening with a blank
back module to ensure proper frame ventilation.
1. Pull down
to unlock the
extractor.
Extractor lock
2. Slide the
module out of
the slot.
