Harris QSEE6800 Plus H, Инструкция по установке и эксплуатации

Страница: 38 / 86

24 QSEE6800
+
H Installation and Operation Manual
Chapter 3: Card-Edge and Parameter Operation
Table 3-1. Card-Edge Parameter Options— QSEE6800
+
H Modules
Hex
Switch
Position
Parameter Name Function LED Indication
0
[RO] Channel Status Indicates the status for each channel
indicated by its associated LED.
There are eight status LEDs on the
module. When hex switch position 0
is selected, these 8 LEDs will indicate
which inputs are currently receiving
signal, and whether that signal comes
with alarms.
(For this Hex switch position, the
toggle has no effect.)
Read-only indicators:
• STATUS 1 = Channel 1
• STATUS 2 = Channel 2
• STATUS 3 = Channel 3
• STATUS 4 = Channel 4
• STATUS 5 = Channel 5
• STATUS 6 = Channel 6
• STATUS 7 = Channel 7
• STATUS 8 = Channel 8
On = Signal is present
Off = Signal is not present
Flashing = Signal is present,
but with an alarm
1 Streaming Option Selects the streaming output by
toggling up and down. The status
LEDs indicate which output option
has been selected.
Note: This setting is for all channels.
You can turn off thumbnails for
individual channels using Hex switch
positions 9-F.
Options:
•
STATUS 1 = MPEG4 and
thumbnail
• STATUS 2 =MPEG4 only
• STATUS 3 = Thumbnail
only
• STATUS 4 = No streaming
2 MPEG 4 Video Output
Selection Selects the single input which will be
output to MPEG-4 video.
One LED lights to indicate the
channel that is selected.
Options:
•
STATUS 1 = Channel 1
• STATUS 2 = Channel 2
• STATUS 3 = Channel 3
• STATUS 4 = Channel 4
• STATUS 5 = Channel 5
• STATUS 6 = Channel 6
• STATUS 7 = Channel 7
• STATUS 8 = Channel 8