Harris NEXIO AMP NX3801HDX, Руководство по установке оборудования и инструкция пользователя

Страница: 69 / 140

NEXIO AMP
Hardware Installation and User Guide
59
©2011 Harris Corporation. All rights reserved.
Figure 3-12 Recording
6 Once the recording is complete, play the test clip back in an available playout
channel by doing one of the following:
a If you used a bi-directional channel, rewind the clip and click Play .
b Load the clip into a play only window.
7 Confirm successful playback on a connected monitor.
8 If the video server has a second ingest channel, repeat the procedure above for
Channel 2 ingest.
To test output signals on remaining playout channels
1 Select the channel window (see Figure 3-13 ).
Figure 3-13 Channel 2 Window
2 Select a clip in MediaBase.
3 Drag the selected clip from MediaBase and drop it in the channel window.
4 Press Play .
5 Confirm playback on a connected monitor.
6 Repeat Steps 1 though 5 for all configured playback channels.