Harris Intraplex HD Link RF Скачать руководство пользователя страница 122

Страница: 122 / 181

HD Link Installation & Operation Manual

5 – Web Browser Interface Configuration & Operation

Version 2, April 2010

5-18

Harris Corporation

Intraplex Products

5.3.6

General Configurations

There are four

General

configuration menu commands:

●

System

: Configure system identification, date and time,

SNTP, and temperature.

●

Advanced Settings

: Configure redundancy, timeout of the

front panel display, and the return path.

●

Configuration/Firmware Management

: Configure file

backup and firmware settings.

●

Contacts

: View and edit digital output and input contacts.

5.3.6.1 System

You can configure system settings on this page (Figure 5-13).

Figure 5-13. General | System Configuration Page

Identification

●

System name

: Type the unique identifier for this system.

●

System location

: Type the unit’s location.

●

Contact person

: Type a contact administrator for system configuration.

●

System description

: HD Link release currently running on this system.

●

System up time

: Period of time this unit has been powered up.

Содержание Intraplex HD Link RF






















































































































































































Результаты поиска

Содержание Intraplex HD Link RF

Отзывы:

Harris Intraplex HD Link RF, Руководство по установке и эксплуатации, Страница: 122 / 181

Результаты поиска

Содержание Intraplex HD Link RF

Отзывы: