Harris FR6822+ Скачать руководство пользователя страница 117

Страница: 117 / 128

6800

Series Safety Instructions and Standards

Important Safety Instructions

Injury Precautions

Warning!

To reduce the risk of fire or electric shock, do not expose this apparatus to

rain or moisture.

French:

AVIS: Risque de choc électrique. Ne pas ouvrir.

Warning!

Potentially lethal voltages are present within this product’s frame during

normal operation. The AC power cord must be disconnected from the frame

before the top panel is removed. (In frames with multiple power supplies,

remove ALL power cords.) Power should not be applied to the frame while

the top is open, unless properly trained personnel are servicing the unit.

Poland:

Przod zdjeciem pokrywy wyciagnac wtyczke z gniazda sieciowego.
Use Proper Power Cord

To avoid fire hazard, use only the power cord specified for this product.

Ground the Product

Do not defeat the safety purpose of the polarized and grounding-type plugs.

A polarized plug has two blades with one wider than the other. A

grounding-type plug has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. When the provided

plug does not fit into your outlet, consult an electrician for replacement of

the obsolete outlet.
Connect to an Earthed Mains Socket-Outlet

The apparatus must be connected to an earthed socket-outlet.

United Kingdom:

WARNING:

This appliance must be earthed.

Norway:

Apparaten må tilkoples jordat stikkontakt.
Finland:

Laite on liitettää suojamaadoitus-koskettimilla varustettuun pistorasiaan.
Sweden:

Apparaten skall anslutas till jordat uttag.
Do Not Operate Without Covers

To avoid electrical shock or fire hazard, do not operate this product with

covers or panels removed.

Laser Radiation When Open

CAUTION:

To avoid damage from laser radiation, do not remove or

displace any connections or protective panels.

6800+ Safety Manual.book Page 5 Wednesday, November 16, 2011 4:27 PM

Содержание FR6822+


























































































































Результаты поиска

Содержание FR6822+

Отзывы:

Бренды по названию

Популярные бренды

Harris FR6822+, Инструкция по установке и эксплуатации

Результаты поиска

Содержание FR6822+

Отзывы:

Бренды по названию

Популярные бренды