Harris assuredcommunications X75-RCP, Инструкция по установке и эксплуатации

Страница: 55 / 99

Control Panels for X75 Systems Installation and Operation Manual 33
Chapter 2: Operation via Front Panel Controls
SD-SDI ARC
The procedure for setting SD ARCs is slightly different than it is for
HD ARCs.
1. In the path
Video Setup > Processing > ARC (SD-SDI Out) >
SD-ARC Insert, select the input (Composite, S-Video, CAV, SD1,
etc.) into which to insert the SD ARC.
The ARC is automatically inserted into the processing path of all
video output groups using this selection.
2. In the path V ideo Setup > Processing > ARC (SD-SDI Out) >
Viewing Modes , select one of the following existing options:
• User (custom setting)
• Anamorphic
• Letter Box
• Center Cut
• 14:9 Letter Box
• 21:9 Letter Box
• Default (Letter Box with HD input; Anamorphic with SD
input)
To create custom ARC settings, follow the path Video Setup >
Processing > ARC (SD-SDI Out) , and make changes to these options:
• Advanced (SD Out)
• Variable (SD Out)
• Input Crop (SD Out)
ARC Button Shortcut
The ARC button provides quick access to the Variable ARC controls to
make custom settings.
•
When the HD video processing block is currently selected, pressing
the
ARC button takes you straight to Variable (SD Out)
• When the SD 1, SD 2 or Analog video proc amp block is currently
selected, pressing the
ARC button takes you directly to Variable
(HD Out) .