SINCE 1979
DAYNA
INSTALLATION EN
HARRIE LEENDERS
Страница 1: ...SINCE 1979 DAYNA INSTALLATION EN DAYNA HARRIE LEENDERS ...
Страница 2: ...ion installation Dayna Transport Take the Dayna on a hand truck from the left side To level Use the 4 adjustable feet Remove transport guard Only remove the transit guard after the Dayna has been connected to the chimney Remove 3 x m8 Allen screw lock nut ...
Страница 3: ...rear connection 2 x m8 Allen screw lock nut at position A B 2 x 60 degrees rotation Place 1 x m8 Allen screw lock nut at position B without allowing it to touch the base of the stove A Check interior Parts in the interior and combustion chamber can shift during transport Remove the heat shield Check if the ventilation pipe above the stove is seated properly slide securely into position underneath ...
Страница 4: ...stove into the room The stove is suitable and prepared for connection to a fresh air supply The stove is suitable for use with a chimney ventilator The appliance is not suitable for a shared flue system The appliance must be installed on a floor having sufficient bearing capacity Ensure adequate access for cleaning the appliance the flue gas connection and the chimney Safety instructions Glass is ...
