5
Start-up
1.
Start the pump only when the suction and discharge pipes are connected to the corresponding inlets and
outlets.
2.
Ensure there are no obstacles in the pump
3.
Apply voltage to the motor and suitably adjust the jets to obtain the desired flow.
Maintenance
The pumps do not require any special maintenance or programming. If the pump will be idle for a longer
period of time , it is recommended to disassemble , clean and store it in a dry , well ventilated place. If the
supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified
person immediately to a hazard.
