STUDY CARREL
3
www.harmonyspaces.ca
S T E P 4
With the back panel at the rear of the desk
tilt the right side of the back panel upwards,
reposition and fit the end clips into the
notches in the back panel while lowering
the back panel onto the table.
S T E P 5
Align and slide notches in the right side
panel into the notches of the back panel
while taking care to fit the lower right panel
arm under the table.
S T E P 6
Recheck and verify the back, left and right
side panels, and end clips are securely fit
together, the assembly sits flat on the desk
and the study carrel is properly aligned with
the top of the desk.
