Page
12
of
28
8.
Lift the foot platform section onto the bed end
(Figure 3)
and clip into the bracket,
ensuring that the bed end is fully clipped in place.
9.
Rotate the locking collar to cover the label
(Figure 4).
Repeat both sides.
Figure 3: Foot section attachment to bed
end
Figure 4: Collar locked
10. Remove the transport bracket from the second bed end by rotating the locking collar to
reveal the label
(Figure 2).
11. Lift the bed end to the end of the head platform section.
12. Lift the head platform section onto the bed end and clip into the brackets (as in step 8);
ensuring that the bed end is fully clipped in place.
13. Rotate the locking collar to cover the label
(Figure 4).
Repeat both sides.
14. Release the castor brakes on one end of the bed only.
15. Carefully align the two sections of the bed and slide together
(Figure 5)
16. Tighten the mid-section thumb wheel and insert the locking pin, plastic spacer and R-clip
(Figure 6)
. Repeat both sides. Re-apply the castor brakes.
Figure 5: Platform connection
Figure 6: Securing platform sections
R-pin
Thumb
wheel
Locking pin
Plastic
spacer
Содержание HPI-8199
