HarmonicDrive H A - 800A, Руководство пользователя

Страница: 221 / 314

9-2 Details of test mode
9-14
10
11
Appe
Test
m
ode
1
2
3
4
5
6
7
8
9
T11: Auto-tuning level selection
Select the level of auto-tuning. Increasing the value set here improves the response, but vibration may
also increase depending on the system.
1
While [T11] is displayed, press the SET button.
The auto-tuning level selection is displayed.

The display will not switch if the button is pressed for 1
second or longer.
2
Press the SET button.
The auto-tuning level selection flickers.
3
Press the UP or DOWN button to change the auto-tuning
level.
The setting range is 1 to 5.
4
Hold the SET button until the auto-tuning level selection
stops flickering and becomes lit.
The set value becomes effective.

If you don't want to apply the set value, release the
SET button before the flickering stops and becomes lit.
The set value of auto-tuning level selection is not
saved.

The set value of auto-tuning level is not saved.
When the HA-800A driver is restarted, the set value returns to the default (3).
UP MODE DOWN S E T
UP MODE DOWN S E T
UP MODE DOWN S E T
UP MODE DOWN S E T
UP MODE DOWN S E T
Hold the SET button until the flickering
stops and becomes lit and then release
the button to make the set value
effective.
UP MODE DOWN S E T
If the SET button is released before the
flickering stops and becomes lit, the set
value is not applied.
SET
UP
DOWN
or
SET