Warner Media - XOS - Quick Start Guide
3. Power on the Laptop.
- In a web browser (Google Chrome), type the IP address ( https://192.0.2.2 )
and press
Enter
.
4. Enter the following credentials and click Log in:
- Login:
xos
‐
Password
:
xos-user
5. Select the
Platform Configuration
tile and click
Launch
.
6. Select the
IP Settings
tab and then the
Ethernet Ports
tab.
7. Enable Ports 5 and 7.
8. Select the
IP Config
tab (see next panel).
9. You can change the IP parameters for the following ports based on your IP
plan:
- Management 01 port (GbE01 – Default: 192.168.1.200)
- Output - Data GbE03 port (Default: 192.168.2.200)
- Input 1 - Data GbE05 port – (set IP address, subnet mask, Gateway)
- Input 2 - Data GbE07 port - (set IP address, subnet mask, Gateway)
10. Click
Save
.
11. Remove the USB-Ethernet adapter from the front panel of the XOS.
12. Install the front bezel.
Contacting Harmonic:
WM‐CBAND‐[email protected]
1. Unpacking and racking
2. Cabling
Quantity Description
1
XOS Server ‐ 1U HPE DL360 G10
2
Power cable
8
Micro BNC to BNC cable
1
Front bezel
1
Rack mounting kit for 1U HPE DL360 G10
1
USB to Ethernet adapter
1
Quick Start Guide
1. Use this list to ensure that your order is complete.
2. Remove the XOS and associated accessories from the box.
3. Mount the XOS in the rack.
The XOS can be mounted in a 19" rack.
- Ensure that it is secured in the rack.
- Maintain air flow around the XOS.
- Do not place another device directly on the top of the XOS.
3. Configure IP addresses
Follow the diagram below to perform the XOS cabling.
1. Use the USB to Ethernet adapter to connect a laptop to the USB port on
the front panel as shown below:
2. Power on the XOS.
- Connect the power cord to the power supply on the rear panel.
- Connect the cable to the power source and turn on the power(Front Panel
Button).
- Wait for the XOS to complete the boot process(~6 min).
-
The Management and Data switches are not
p
provided by Harmonic
- The Management PC is recommended
If you don’t have a Management PC, keep the laptop
connected until you complete the configuration (Step 8).
Under the
Platform Configurations
tile ->
IP Settings
tab, enable Ports 5
and 7 for the Source Multicast IP inputs. Set the port physical IP addresses
according to your network switch IP assignments. Click
Save
.
