Chapter 7 Device Configuring Using EMS
EMS Connection Wizard
© 2012 Harmonic Inc.
140
ProView 7000 v.2.6, Rev. E
7.7.2
Descrambling a Decoded Program
To allocate a CAM slot to a scrambled decoded program:
1. Cross connect an input program to the decoder (see
7.6.2 Input to Decoder Channel
2. Check the
Descrambling with checkbox on the Service tab in the Decoding Channel
Properties dialog.
3. Select the CAM slot for the service.
4. Click
Create
to confirm the program cross-connection.
7.8
EMS Connection Wizard
The ProView 7000™ EMS Connection Wizard provides EMS guided input program cross
connection to any device output and device decoding channels.
1. The EMS Connection Wizard is activated from the EMS Menu tree, by selecting
Actions > Connection Wizard…
option or by clicking
Connection Wizard
in the EMS
toolbar.
The displayed wizard select dialog provides access to the setting the following:
❑
Input Program Cross-Connections – For details, refer to
Connection using the Connection Wizard
.
❑
Input Program Decoding Channel – For details, refer to
Channel using the Connection Wizard
Figure 7–32: Connection Wizard dialog
Related Topics:
■
Setting Program Cross-Connection using the Connection Wizard
■