![Harmonic ProStream X Скачать руководство пользователя страница 18](http://html1.mh-extra.com/html/harmonic/prostream-x/prostream-x_installation-manual_3963335018.webp)
Chapter 2: Installing ProStream X
1. Connect the USB cable inside the bezel to the right-hand USB port on the front panel. (The other USB
port is covered.)
2. Keeping the corners aligned, press the bezel straight onto the chassis.
Result:
The USB cable will form a loop that fits inside the metal panel of the bezel.
3. Hand-tighten the two captive thumb screws to secure the bezel in place.
Figure 2-5: Bezel installation
Cabling the device
Connect the Gigabit Ethernet ports on the device.
IMPORTANT:
• Harmonic recommends that shielded and grounded Ethernet cables be used on all
Ethernet ports.
• Failure to properly configure the Ethernet switches could result in a mismatch between
the IP input or IP output and the switch.
18