Harmonic NSG 9108, Установка оборудования

Страница: 36 / 83

28 Preliminary Configuration of the NSG
CHAPTER 2
Using Hotkeys
The hotkeys are a combination of up to three keys pressed
simultaneously. The following table lists the available hotkeys and
describes their functionality:
Control Panel Operation Modes
The control panel provides the user with two different access modes so
as to impede unauthorized access:
Monitor - the default mode that allows you to only view the configuration
in the NSG.
Configure - allows you to edit various parameters and to apply the
changes. After thirty minutes of inactivity in this mode, the system
switches automatically to Monitor mode. The Configure mode is
controlled by a password to allow authorized users only to change the
NSG settings. To obtain a password, refer to the document enclosed with
the NSG unit.
Hotkey Explanation
<Esc & Enter> Moves you to the Network Config screen.
<Esc & Up & Right>
Press keys for 5 seconds
at least
Resets the unit.
<Esc & Up or Down> Adjusts the contrast of the display area.
<Esc & Left & Right>
Press keys for 3 seconds
at least
Moves to the Change Op Mode screen.
<Esc & Left & Right> While editing, clears the entry field and moves
cursor to the bottom left.
<Esc & Left> While editing, operates as a backspace.
<Esc & Right> While editing, deletes entries.