![background image](http://html2.mh-extra.com/html/harmonic/ellipse-3000/ellipse-3000_user-manual_3952567031.webp)
Chapter 2 Initial Configuration and Basic Opera-
tion
© 2013 Harmonic Inc. Harmonic All rights reserved.
31
Ellipse 3000 Release 3.0, Rev. B
Ellipse Set-Up Procedures
2.2.2
DVB-S2 L-Band Modulator Setup Procedure
The modulator parameters are specific to the receiving satellite you are using. Make sure you
have all the parameters you need to set-up the modulator.
Configure the basic parameters for the Ellipse L-Band modulator.
To set up a link with the following parameters:
■
DVB-S2 Scheme / 8PSK 2/3 FEC and modulation type
■
Symbol Rate: 10,000,000 symbols per second [sps]
■
L-Band frequency: 950,000 Hz
■
LO frequency: 14,000,000 Hz
■
Spectrum inversion: Direct
■
Carrier and Modulator operation mode: C+M Manual Restore
1. Navigate
Root > L-Band Modulation and Up Converter
on the front panel.
2. Select
Modulation Scheme
to display the
Modulation Scheme
menu.
L-Band Modulation & Up-converter
Carrier
On
L-Band Power
-20
Reduced L-Band Power
-13.0
Modulation on/off
Off
Symbol Rate
10000000
TX RF Freq
014950000
RF Conv. LO Freq
014000000
L-Band Frequency
0950000
Spectrum Inversion
Direct
Modulation Scheme
DVB-S2
FEC and Modulation
QPSK 2/3
Frame Length
64800 bits
Operating Mode
C and M Restore...
Roll-Off Factor
0.35
Pilot Mode
Off
Remote Power 24VDC
Off
10MHz Clock
Off