Chapter 6 Audio Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved.
221
Ellipse 3000 Release 3.0, Rev. B
Coding Scheme Configuration
6.5.9
Linear PCM Pass Through Parameters Menu
The Linear PCM Pass Through Parameters menu is the configuration menu of the Linear PCM
audio channel. This menu allows setting audio parameters.
The Linear PCM coding scheme is used when the audio stream is to remain un-encoded; this
maintains the best stream-quality and audible quality. This is often used for audio-based
transmissions, such as radio stations and so on.
The Linear PCM Pass Through scheme allows the audio stream as is and the output rates are
calculated in Mbps (instead of kbps).
NOTE:
When Ellipse transmits pass-through coding schemes, the Ellipse must be synchronized with the
external equipment sending the audio stream (see in
Appendix D, Audio Pass Through Schemes Set-Up
).
Front Panel
To access the Linear PCM Pass Through Parameters menu on the front panel:
❖
Navigate
Root > Configuration > Audio > [Audio Channel] > Linear PCM pass through Parameters
.
Web Manager
To access the Linear PCM Pass Through Parameters box in the Web Manager:
❖
Select
Audio > Aud#
.
Linear PCM Pass Through Parameters
1 Encoding Mode
Stereo
2 Sample Rate
48 kHz
3 Output Rate
2.688 Mbps/24 bits
4 A/V Delay
000
