Chapter 6 Audio Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved.
216
Ellipse 3000 Release 3.0, Rev. B
Coding Scheme Configuration
6.5.8
Dolby E Pass Through Parameters Menu
The Dolby E Pass Through Parameters menu is the specific-configuration menu of the Dolby E
Pass Through coding scheme. This menu allows setting the pass through coding scheme specific
audio parameters.
Dolby E pass through coding scheme is used for the audio stream to remain un-encoded. This
situation maintains the best stream-quality and audible quality. This is often used for audio-based
transmissions, such as radio stations and so on.
NOTE:
When Ellipse transmits pass through coding schemes, the Ellipse must be synchronized with the
external equipment sending the audio stream (see
Appendix D, Audio Pass Through Schemes Set-Up
).
Front Panel
To access the Dolby E Pass Through Parameters menu on the front panel:
❖
Navigate
Root > Configuration > Audio > [Audio Channel] > Dolby E pass through Parameters
.
Web Manager
To access the Dolby E Pass Through Parameters box in the Web Manager:
❖
Select
Audio > Aud#
.
Figure 6–17: Dolby E Pass Through Parameters
The following sections detail the Dolby E Pass Through menu options and parameters.
Dolby E Pass Through Parameters
Encoding Mode
Stereo
Sample Rate
48 kHz
Output Rate
2.688 Mbps/24 bits
A/V Delay Offset
000
