Harmonic ELECTRA VS, Руководство пользователя, Страница: 232 / 604

Chapter 3 ’Web User Graphical Interface’ — Workflow Library
232 Electra VS - Version 05.10
User Manual - Rev. A
Processing Component Parameters Array
The array lists the parameters that should be set for the processing
component. It contains a row per parameter, and the following columns:
 Name : name of the parameter, not editable.

Default value : click to enter a default value.
 for private and protected parameters, the default value is
applied when creating or starting a job.

for public parameters, the default value is proposed when
creating a job but it can be modified. Any change of the default
value does not apply to the running jobs.
 Publish : choose if the parameter should be:
 Private : the parameter is set and invisible when creating a job.
This is the status you must use when creating a workflow for
parameters that you do not want the job authors to see or
change.
 Protected : the parameter is visible but not editable when
creating a job. Use this status if you want to let the job authors
see the value of a parameter without being able to change it.
 Public : the parameter is visible and editable when creating a job.
Use this status for all parameters that the job authors must set.
 Label (optional): click to choose an explicit name for the parameter,
as it will appear to the workflow user instead of the original name. If
you want to be able to link a parameter to a private parameter, it is
imperative that you give a label to this private parameter. Refer to
section
’Link Tool’ on page 236.
 Value restriction : double-click to define restrictions for a value.
Check the box and choose a type of restriction:
 Range : enter the minimum and maximum values.
Figure 3-204. Restriction configuration on a processing component – Range