manualshive.com logo in svg

Harmar Mobility Pinnacle SL600, Инструкция по установке и обслуживанию

Владельцы лифта для инвалидов Harmar Mobility Pinnacle SL600 могут легко и бесплатно загрузить руководство по эксплуатации на нашем веб-сайте. Это руководство поможет вам правильно использовать и обслуживать ваш лифт, обеспечивая безопасность и надежность. Посетите manualshive.com, чтобы скачать инструкцию.

Поделиться
Скачать
background image

                   Stair Lift SyStem

Installation and Service Manual

WARNING! STRICT ADHERENCE TO THESE INSTALLATION INSTRUCTIONS is required and will promote the safety of those 

installing this product, as well as those who will ultimately use the lift for its intended purpose. Any deviation from these 

instructions will void the LIMITED WARRANTY that accompanies the product. Additionally, any party installing the product 

who deviates from the INSTALLATION INSTRUCTIONS shall be taken to agree to INDEMNIFY, SAVE AND HOLD HARMLESS the 

manufacturer from any and all loss, liability or damage, including attorneys fees, that might arise out of or in connection with 

such deviation.

Содержание Pinnacle SL600




























Отзывы:

Нет отзывов

Похожие инструкции для Pinnacle SL600

Бренды по названию

Популярные бренды

Загрузить еще бренды