Advanced Settings
49
AMX RoomBook Scheduling Touch Panels - Instruction Manual
Configuring VNC Access
In the
VNC
page, use the options under VNC SERVER to configure various aspects of VNC access on the panel:
Press
Timeout
to specify a timeout period for VNC connections, in the
Timeout
window. Press
OK
to save changes.
Press
Password
to assign the password to be required to establish a VNC connection, in the
Password
window. By default,
no VNC password is set. Press
OK
to save changes.
Press
Port
to specify the port to be used by the VNC Web Server, in the
Port
window. This option is not available if VNC is
currently enabled. Press
OK
to save changes.
Press
Maximum Connections
to set the maximum number of users that can be simultaneously connected to this panel via
VNC. Press
OK
to save changes.
CONNECTIONS - Ethernet
The
Ethernet
page (FIG. 81) controls the configuration of settings for Ethernet communication with the panel.
FIG. 81
CONNECTIONS - Ethernet page
CONNECTIONS - Ethernet page options
DHCP/Static:
Sets the panel to either DHCP or Static communication modes.
•
DHCP
is an IP Address assigned to the panel by a DHCP server. If DHCP is selected, the other
Network Connection
fields are disabled (see below).
•
Static IP
is a permanent IP Address assigned to the panel. If Static IP is selected, the other
Network Connection
fields
are enabled.
IP Address:
Displays the IP address for this panel. If DHCP is enabled, this field will be disabled.
Subnet Mask:
Displays the subnetwork for this panel. If DHCP is enabled, this field will be disabled.
Gateway:
Displays the gateway address for this panel. If DHCP is enabled, this field will be disabled.
Hostname:
Displays the hostname for this panel.
Domain:
Displays a name to the panel for DNS look-up. If DHCP is enabled, this field will be disabled.
Primary DNS:
Displays the address of the primary DNS server used by this panel for host name lookups. If DHCP is enabled, this field
will be disabled.
Secondary DNS: Displays the secondary DNS address for this panel. If DHCP is enabled, this field will be disabled.
MAC Address:
This unique address identifies the Ethernet connection in the panel (read-only).
Return icon - press to jump to the previous view