Harman Martin ERA 150 Wash, Руководство пользователя

Страница: 24 / 52

24 Martin ® ERA 150 Wash User Guide
Manual effects tests
You can also manually test individual effects.
To test LED dimming:
1. Select FIXTURE TEST
→ TEST DIMMER and press ENTER.
2. To stop the test and return to the previous level of the menu structure,
press MENU.
To test an individual effect:
1. Select FIXTURE TEST
→ TEST EFFECTS and press ENTER.
2. Use the DOWN and UP buttons to select RED, GREEN, BLUE, CTC,
COLOR (this tests the virtual color wheel effect), or ZOOM. Press
ENTER to confirm your selection. The fixture will now run an automatic
test of the selected effect.
3. Press MENU to exit the test and return to the list of effects.
Fixture information
Power on time
1. Select INFORMATION → POWER ON TIME and press ENTER to
display the total number of hours the fixture has been powered on since
it left the factory.
2. To return to the previous level of the menu structure, press MENU.
LED operating time
1. Select INFORMATION → LED HOURS and press ENTER to display the
total number of hours the LEDs have been activated since the fixture left
the factory.
2. To return to the previous level of the menu structure, press MENU.
Firmware version
To see which software version is installed in the fixture:
1. Select INFORMATION
→ SW VERSION and press ENTER. The display
will indicate the currently installed firmware version.
2. Use the UP and DOWN buttons to scroll through firmware revisions.
3. To return to the previous level of the menu structure, press MENU.
Fixture ID number
You can set a custom 4-digit ID number for the fixture to help you identify it.
To manage the ID number:
1. Select INFORMATION
→ FIXTURE ID and press ENTER. The display
will indicate the current fixture ID number.