background image

16

16

7. PLAY

7.1 Power-on/Auto standby/Auto wakeup/

Power-saving mode

1

2

POWER

LOAD

READY

3

HELLO

Switch on

• 

On the soundbar, press 

 

to switch on.

 

” is displayed.

 

The subwoofer is reconnected to the soundbar 
automatically. 

Connected:

 

 

turns solid white.

 

On the detachable speakers, press 

 

to  reconnect  to  the    

soundbar.

 

Auto standby

If the soundbar is inactive for more than 10 minutes, it will switch 
to standby mode automatically. “

” is displayed. 

 

The subwoofer also goes to standby, and 

 turns solid 

amber.

 

10 minutes later, the detachable speakers switches to 
standby, and the status indicator turns off for wireless 
connection status.

 

Next time you switch on the soundbar, it returns to the 
last selected source.

Auto wakeup

In standby mode, the soundbar will wake up automatically when

• 

the soundbar is connected to your TV through the HDMI 
ARC connection and your TV is switched on; 

• 

the soundbar is connected to your TV through an optical 
cable and audio signals are detected from the optical cable;

• 

the soundbar is connected to your TV through the HDMI 
ARC connection and through the HDMI connection, is also 
connected to your digital device such as a set-top box, DVD/
Blu-ray player or game console, and your digital device is 
switched on;

• 

the soundbar is connected to your home network and audio 
is streamed to the soundbar through Chromecast or AirPlay. 

Power-saving mode

In power-saving mode, Wi-Fi and Bluetooth are disabled on the 
soundbar. You cannot wake up the soundbar by playing music 
through Chromecast or AirPlay. 

The soundbar will switch to standby, and then enter power-
saving mode if the detachable speakers

• 

run out of power; or

• 

lose wireless connection.

On the detachable speakers, the status indicator flashes red; 

on the soundbar, “

” or “

” is 

displayed. Charge the detachable speakers by docking them 
onto the soundbar or though USB cables (See “Charge the 
detachable speakers” in the “SETUP” chapter).

 

If necessary, 

press   on the detachable speakers to re-connect to the 
soundbar.

CHARGE SPKR. BATT LOW

Содержание JBL BAR 9.1


























Отзывы: