page 33
DriveCore Install DA Series Operation Manual
Editing DSP Settings
Input/Output Delay
The Input delay includes up to 2 seconds of delay. The Output delay is typically used for driver alignment and offers up to 0.1 second of output delay. The Input/Output Delay
panels can be accessed by clicking one of the amplifier channel's
Delay
icons from the Configuration panel (see
).
Figure 40:
Delay panel
On Button
This button turns the delay on or off.
Slider and Arrow Buttons
Click-drag this slider or click the arrow buttons at either end of the slider to adjust delay time.
Seconds Field
Use this field to enter delay time in seconds by clicking and entering the desired value or clicking the up/down buttons.
Feet Field
Use this field to enter delay time in feet by clicking and entering the desired value or clicking the up/down buttons.
Meters Field
Use this field to enter delay time in meters by clicking and entering the desired value or clicking the up/down buttons.