13
Operation
Routing Computer Audio
Before using the BLU-USB for the first time, you will likely need to select it as
the recording and/or playback device in the computer or software application,
whichever is applicable for the installation. You may also have to set the USB
sample rate/bit rate settings to match the BLU link bus (either 48kHz/24-bit or
96kHz/24-bit).
If using a software application that allows independent audio routing, consult the
software application's help for information on configuring audio hardware and
routing. When used with multi-track recording software, the BLU-USB's USB mode
should be set before selecting the BLU-USB as the software's audio hardware
device, see
'Selecting the USB Mode' on page 11
Windows Setup
To route system audio in Windows:
1.
Click the
Windows Start Menu
then select the
Control Panel
.
2.
Click the
Sound
Icon.
