8
Installation
Making Connections
The following diagram shows a typical application using a BLU-USB interface.
BLU link System or Device
Soundweb
TM
Computer
BLU-USB
BLU link
OUT
Connect output of last device to input
of first device for redundant operation.
USB Port
BLU link
IN
NOTE:
All BLU link connections must be made using Category 5e or higher
cabling. Connecting the last BLU link device in the chain back to the first device will
provide redundant operation — meaning if any one BLU link cable is compromised,
the BLU link bus will continue to pass audio.
NOTE:
BLU link audio will not pass through an Ethernet switch or router. BLU
link connections must be made directly between BLU link devices.
