Harman AMX PR01-0808, Руководство пользователя

Страница: 17 / 50

14
Front Panel Control
This HDMI matrix is designed with ease of connection and control in mind.
Basic switching of input sources to output displays can be achieved by
pressing front panel buttons and the front LEDs indicate the current input and
output status of the matrix.
After power on, the front panel LEDs will show matrix model name, and then
the matrix is ready for operation.
Step 1 . Press the Left or Right button to select output channel, after the
selection is complete, the corresponding LED of the output channel will blink
slowly.
For example, press the
Right button, select output channel 2, the second
LED will blink slowly.
Step 2. Press Up or Down button to select the desired input channel. When
an output is turned off, LED will display"--".
For example, select output channel 2, then press
Up button, select input
channel 3 for output channel 2.
Note: Press UP/Down buttons at the same time for 3s, LED will show the
device IP address.