MKIV Ocean Unit 3
11
Assembly
Top Foil
Cut foil to length using hacksaw. Deburr
inside edge using rat-tail file.
Drill two
1
/
8
" (3 mm) holes in foil for self-
tapping screws.
Mark the location of the trim cap screws at
the cut end of the top foil.
Location:
1" (25.4 mm)down from top of
foil and 9/16" (14.2 mm) from center of the
sail groove. See dimensions below.
1" (25.4 mm)
9
/
16
" (14.2 mm)
1 1/8" (28.5 mm)
