Harken 1130, Руководство пользователя и по обслуживанию

Страница: 25 / 54

User and maintenance manual Winch 1130 – Mod.0 25
12. Installation
Before installing the winch, pay attention to those aspects:
- Deck and its characteristics
-
Entry line angle
- Winch positioning
-
Winch lifting and handling
WARNING!
Install the winch correctly and solidly on a flat area of the deck and ensure that
the deck is robust enough to support the working loads of the winch.
Consult the boatbuilder if you have any doubts about a suitable location for the
winch.
NOTE!
Before installation the winch must be partially disassembled.
Follow the steps of the ‘Disassembly procedure’ illustrated in the chapter
‘Maintenance’ of this manual until the drum support is removed.
Once the drum support is removed and the base of the winch is revealed, deck
installation can begin.
WARNING!
In deciding where to install the winch make sure that the rope is not parallel to
the base of the winch to void turns of the rope fouling around the drum, which
could seriously damage the winch and/or put the crew in danger. This dangerous
fouling can be avoided by ensuring an entry angle for the rope of 8°.
NOTE!
The correct entry line angle is: 8°
CORRECT!