Harken 1111 HL, Руководство пользователя и по обслуживанию

Страница: 4 / 41

User and maintenance manual Winch 1111 HL – Mod.A
- Never substitute any winch part with one that is not original. Even though they look
similar and are both made by Harken
®
, the non-original part may not be suitable and the
warranty will be invalidated.
- Modifications carried out by the user, without explicit written authorization from the
manufacturer, will invalidate the warranty and relieve the manufacturer of any
responsibility for damage or injury caused by the defective product.
- Failure to install the winch will void the warranty of the device itself and the Harken
®
product to which it is connected.
- Refer to the warranty on the web site www.harken.com .
- Do not apply to the winch loads greater than the MWL (Maximum Working Load).
- If the winch is powered by an electric motor:
Make sure the power is switched off before installing or carrying out maintenance on the
winch
- If the winch is powered by a hydraulic motor:
Do not operate the hydraulic motor during installation or maintenance.
Do not let the oil in the system come into contact with your eyes or skin.
Harken
®
cannot be responsible for damage or injury resulting from unsafe product use,
lack of maintenance or incorrect product and /or system installation or operation.
- Wear suitable clothing when using the winch, to avoid loose ends of fabric becoming
entangled in the winch.
- Periodical maintenance must be carried out regularly as specified in the chapter on
Maintenance. In case of doubt, contact Harken Tech Service.
- This manual is available only in English. If you do not fully understand the English
language, do not carry out the operations described in this Manual. For any concerns,
questions or comments contact the Harken distributor nearest to you, Special Project
assistance, or contact the Harken Italy Technical Service by e-mail:
techservice@harken.it
- See www.harken.com for additional safety information.