Adjustable Roller
Lock knob (K1)
Pointer Lock
Knob (K2)
Pointer
How To Use:
Mode 1 [ Manual Mode ]
Instruction Sheet
Rotary Turn-Table R470M
Package Contents
Specification:
Diameter
:
460 mm
Max Speed:
3.5 rpm
Min Speed:
0.3 rpm
7.5 Kg
Max Load:
(K1)
Adjustable
Roller (R1)
Motorised Roller (M1)
Central Spindle (SP1)
9.
2
4
5
5
6
7
3
1
1. Base Plate (White Diffuser) (W1) 1 Pc.
2. Base Plate (Transparent) T1 1 Pc.
3. Power Adaptor 1 Pc.
4. Motor Controller 1 Pc.
5. Cross Base 1 Pc.
6. Carry Bag 1 Pc.
7. Instruction Manual 1 Pc.
Turn the knob (K1) anti-
clockwise to loosen it.
(Note: only 1-2 turns of
the knob are sufficient
to loosen it)
1.
Place the Base plate (T1)
by aligning its central hole
(H1) with the central spindle
(SP1) Press down gently so
that the (SP1) fits snugly
into hole (H1)
6.
Central
Hole (H1)
Base Plate
(T1)
Base Plate
(W1)
Rotate the rotary plate by hand
so the number ‘1’ aligns with the
pointer as shown:
8.
Place the second base plate
(White Diffused) (W1) on the
transparent base plate so
that the edges of both base
plates align.
(K2)
Once loose move the pointer to the
position as shown:
Tighten the knob K2 by turning it
clock-wise. A dimple in the pointer
base will match with an alignment slot
so as to position the pointer correctly.
5.
4.
The Rotary Turn-Table is now
ready to be used in the manual
mode.
7.
Note: R1 Should be at
a higher level to M1
}
(K1)
(R1)
M1
Lock by turning knob
(K1) clock-wise.
2b.
2a.
Loosen the pointer
tightening knob (K2) by
turning it anti-clockwise
3.
R
Raise the knob
( and the roller R1)
upwards.
