HARDWARE RESOURCES SWS-PO21 Series Скачать руководство пользователя страница 1

IMPORTANT:

 

Before you begin, make sure you familiarize yourself with all the 

parts and fully read the instructions.

CUSTOMER SERVICE:

 

Toll free customer help line available weekdays between 7:00am 

and 6:00pm Central Time at 800-463-0660.

TOOLS NECESSARY:

 

Screw gun or Phillips screwdriver, level and tape measure. NOTE: 

If screw gun has a clutch, set to lowest setting so as not to over 

tighten and/or strip screws.

PARTS IDENTIFICATION:

  

A

Front Mounting Bracket

1 pcs

B

Rear Mounting Bracket

1 pcs

C

100 lb. Undermount Slides

1 pair

D

Pot & Pan Organizer Unit

1 pcs

E

Angled Hook

5 pcs

F

Straight Hook 

3 pcs

G

Sway Bar Hook

16 pcs

H

#8 X 5/8” Pan Head Phillips Wood Screw

6 pcs

I

M4 X 6 Flat Head Phillips Machine Screw

8 pcs

J

T-Handle Hex Driver

1 pcs

Storage with Style 

Pot/Pan Organizer

Scan to watch the installation video

https://delivr.com/23y5t

STEP 1 - Mark Mounting Location

For face framed cabinets:  For front bracket, find center of the face frame opening from front to left and mark back 1/2” from the front 

of the face frame. Also mark 1-1/2” from the first mark on both sides as shown above. For the rear bracket find center of cabinet from 

right to left and measuring down 2-1/8” plus the width of the front face frame make a plus sign mark. Draw a straight line from that 

mark to top of cabinet. On either side of that line measure over 15/16” and draw two parallel lines as shown above.
For frameless cabinets: Find center on the front of the cabinet and measure back from the front 1/2”. From the first mark measure 

over 1-1/2” on both sides and mark as shown above. Find center in the rear of the cabinet and measure down 2-1/8”. Draw a straight 

line from that mark to top of cabinet. On either side of that line measure over 15/16” and draw two parallel lines as shown above.

Installation Instructions for 

the SWS-PO21 Series

D

A

B

C

E

F

G

I

J

STEP 2 - Mounting Bracket Installation

On the front marks, start a #8 X 5/8” pan head wood screw on the left front mark (left). Remove the one attachment screw on the rear 

bracket (center) and separate the two parts of the rear bracket, set top portion aside for step 3. Attach the lower portion of the rear 

bracket to the back of the cabinet as shown (right) with (2) #8 X5/8” pan head wood screws.

Center of cabinet

1-1/2” off center on both sides

1/2” back from 

face frame or 

front of cabinet

Center of cabinet

15/16” off center 

on both sides

Top of cabinet

Face Frame

Face  Frame:    2-1/8” +  face        

frame thickness 
Frameless:  2-1/8” 

Attachment

Screw

#8 X5/8” pan head wood screws

Отзывы: