Metal Drawer Box
Waste Container
STEP 1
Detach the Slides
STEP 2
Remove the Mounting Brackets
Detach the slides from the metal wall drawer box.
Use a screwdriver to turn the mechanism in the drawer box that
will release the mounting brackets that are on the inside.
Installation Instructions for
the CAN-MDB5 Series
Double/Single Can 35 qt/50 qt
Trash Systems
STEP 3
Install the Front Mounting Brackets
Install the front mounting brackets on the front using the screws provided and according to the dimensions above.
Move this black piece to the
side to reveal the screw hole
IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll free customer help line available weekdays between
7:00am and 6:00pm Central Time at 800-463-0660.
TOOLS NECESSARY:
Screw gun or Phillips screwdriver and tape measure. NOTE: If
screw gun has a clutch, set to lowest setting so as not to over
tighten and/or strip screws.
PARTS IDENTIFICATION:
A
Grey 35 or 50 Quart Trash Can
1 Single/2 Double
B
Top Cover
1 pc
C
Back Panel
1 pc
D
Bottom Panel
1 pc
E
MDB500-185-21GR
1 pc
F
#8x5/8 Pan head Wood Screw
4 pcs
G
Metal Runners with Screws
2 pcs
Scan to watch the installation video
https://delivr.com/2hmwh
A
B
C
D
E
F
G
